Tap with a finger on any area other than the area to be slid, and the Smart Lock settings screen will appear.
③Auto-Lock
Automatically locks the door after a certain amount of time has passed after unlocking. The time can be set to any value between 10 and 999 seconds.
1．
Tap the "Lock after".
2．
Select the time and tap the "Save".
■ Caution
If the Auto-Lock setting is set to On, you may be locked out when you leave the house. Always carry your physical key and smart phone with you, even when you go out temporarily to take out the trash or check the mail.
④Display Fake PIN
To prevent others from guessing the passcode from the fingerprint on the numeric keypad, a random number will be displayed before entering the passcode.
When the Fake PIN setting is turned on, the process is as follows: enter the Fake PIN → enter the passcode → unlock the door.
⑤Easy-lock
If the passcode is registered and the Easy-lock setting is On, you can lock the device by simply pressing the start button.
●Knowledge
Easy-lock is not available in the following cases.
- When using an emergency power supply
- When Block Prank is activated
⑥Block Prank
If the passcode is entered incorrectly 5 times in a row, the ten-key operation will be stopped for 3 minutes.
Pressing the activation button on the outdoor side while the function is active will cause the numeric keypad numbers 0-9 to blink (fast blinking) and sound "beep-beep-beep..." for 10 seconds. After 3 minutes, the system will become operational.
●Knowledge
If you operate it before the Block Prank is released, the Block Prank status will be extended again for 3 minutes.
⑧Passcode
You can add, edit, and delete passcodes.
●Knowledge
The maximum number of passcodes you can add is 50.
