Initial Settings > Smart Lock Settings
Settings and registration of NinjaLock M
To unlock/lock by passcode, the initial passcode must be set.
Follow these steps to set the passcode.
■ Caution
If the message "Please set the passcode" is displayed, set the initial passcode.
Set the initial passcode even if you do not use the passcode to unlock/lock the door.
If you leave the house without the physical key, and you cannot operate the application or unlock the door with the passcode, you will not be able to unlock the door even if you contact our support.
Because the smart lock is battery-operated, it can be unlocked with a passcode even in the event of a power outage or system failure.
Initial passcode setting
1．
Check the Smart Lock on the home screen for the "Please set a passcode" message.
●Knowledge
If no passcode is registered, the above message will be displayed.
If a preview has been conducted prior to moving in, or if a passcode has been set by a previous resident, the passcode will be deleted and a random number will be used to generate an initial passcode before moving in, and the above message will not be displayed. Please change the passcode to one that is less likely to be analogized.
Message is displayed >> 2.
Tap on any non-swipe area of the Smart Lock.
3．
Tap the "Passcode".
4．
Tap the "Add New Passcode".
5．
Enter your name and a 4 to 8 digit passcode.
6．
Tap the "Save".
7．
After the success page is displayed, return to the Passcode page.
Message not displayed >> 8.
Tap on any non-swipe area of the Smart Lock.
9．
Tap the "Passcode".
10．
The initial passcode is pre-entered. Tap the "Passcode".
◇memo
Multiple initial passcodes may have been entered in advance.
11．
Enter your name and a 4 to 8 digit passcode.
12．
Tap the "Save".
13．
When you get a confirmation message, tap "Save".